TE Connectivity PVDF Solder Sleeve 19.1mm Length 4.3 → 7.6mm Cable Diameter

RS tootekood: 136-2112Bränd: TE ConnectivityTootja Part nr.: SO63-5-55-22-90
brand-logo
View all in Jootmuhvid

Tehnilised dokumendid

Spetsifikatsioonid:

Minimum Cable Diameter

4.3mm

Maximum Cable Diameter

8mm

Sleeve Length

19.1mm

Material

PVDF

Minimum Operating Temperature

-55°C

Maximum Operating Temperature

+150°C

Series

SO63

PRICED TO CLEAR

Yes

Standards Met

ANSI J-STD-004, ANSI J-STD-006

Päritoluriik

Mexico

Toote üksikasjad

TE Solder Sleeves SO Series

A complete soldering system that provides an environmentally protected shield termination on cables. The soldering system consists a heat shrinkable sleeve containing fluxed solder and a thermoplastic sealing insert at each end. The solder sleeve is placed over the joint to be made and heated, shrinking the sleeve and melting the sealing inserts and solder. Producing a secure and reliable connection.

Lao andmed ajutiselt ei ole saadaval.

Palun kontrollige hiljem uuesti.

Lao andmed ajutiselt ei ole saadaval.

€ 257,00

1 pakk 100 tk (ilma käibemaksuta)

€ 313,54

1 pakk 100 tk (koos käibemaksuga)

TE Connectivity PVDF Solder Sleeve 19.1mm Length 4.3 → 7.6mm Cable Diameter

€ 257,00

1 pakk 100 tk (ilma käibemaksuta)

€ 313,54

1 pakk 100 tk (koos käibemaksuga)

TE Connectivity PVDF Solder Sleeve 19.1mm Length 4.3 → 7.6mm Cable Diameter
Lao andmed ajutiselt ei ole saadaval.

Tehnilised dokumendid

Spetsifikatsioonid:

Minimum Cable Diameter

4.3mm

Maximum Cable Diameter

8mm

Sleeve Length

19.1mm

Material

PVDF

Minimum Operating Temperature

-55°C

Maximum Operating Temperature

+150°C

Series

SO63

PRICED TO CLEAR

Yes

Standards Met

ANSI J-STD-004, ANSI J-STD-006

Päritoluriik

Mexico

Toote üksikasjad

TE Solder Sleeves SO Series

A complete soldering system that provides an environmentally protected shield termination on cables. The soldering system consists a heat shrinkable sleeve containing fluxed solder and a thermoplastic sealing insert at each end. The solder sleeve is placed over the joint to be made and heated, shrinking the sleeve and melting the sealing inserts and solder. Producing a secure and reliable connection.