Tehnilised dokumendid
Spetsifikatsioonid:
Actuator Type
Cable Pull
Normal State Configuration
NO/NC
IP Rating
IP66
Maximum Current
10A
Maximum AC Voltage
240V
Series
OsiSense XC
Length
62mm
Minimum Operating Temperature
-20°C
Depth
30mm
Width
60mm
Maximum Operating Temperature
+80°C
Mechanical Life
30 x 10000000Cycles
Better World Verification
Green Premium
Päritoluriik
France
Toote üksikasjad
Telemecanique Electric Eye-let Pull Limit Switch XY2-CD
A position switch with cable control is an ideal form of emergency stop within large environments such as factories and production lines. Telemecanique Sensors presents the XY2CD, this position sensor is controllable from anywhere within a work area. Also known as a cable pull, rope pull or cord pull, cable or rope can be attached to the eye-let actuator, once the cable is pulled, the limit switch is triggered. This type of switch allows all users in an industrial or production setting access to an emergency stop no matter where they are situated.
The WY2CD can be connected via screwed terminal strips and also connected to a sensor via 3 PG11 sealing gland inputs. Featuring a blue unit, with plastic head has a body made from Zamak offering high impact and corrosion resistance whilst being heavy-duty. With a life cycle of up to 1500000 cycles, this switch is durable, rugged and reliable.
Lao andmed ajutiselt ei ole saadaval.
Palun kontrollige hiljem uuesti.
€ 150,00
tk (ilma käibemaksuta)
€ 183,00
tk (koos käibemaksuga)
1
€ 150,00
tk (ilma käibemaksuta)
€ 183,00
tk (koos käibemaksuga)
1
Tehnilised dokumendid
Spetsifikatsioonid:
Actuator Type
Cable Pull
Normal State Configuration
NO/NC
IP Rating
IP66
Maximum Current
10A
Maximum AC Voltage
240V
Series
OsiSense XC
Length
62mm
Minimum Operating Temperature
-20°C
Depth
30mm
Width
60mm
Maximum Operating Temperature
+80°C
Mechanical Life
30 x 10000000Cycles
Better World Verification
Green Premium
Päritoluriik
France
Toote üksikasjad
Telemecanique Electric Eye-let Pull Limit Switch XY2-CD
A position switch with cable control is an ideal form of emergency stop within large environments such as factories and production lines. Telemecanique Sensors presents the XY2CD, this position sensor is controllable from anywhere within a work area. Also known as a cable pull, rope pull or cord pull, cable or rope can be attached to the eye-let actuator, once the cable is pulled, the limit switch is triggered. This type of switch allows all users in an industrial or production setting access to an emergency stop no matter where they are situated.
The WY2CD can be connected via screwed terminal strips and also connected to a sensor via 3 PG11 sealing gland inputs. Featuring a blue unit, with plastic head has a body made from Zamak offering high impact and corrosion resistance whilst being heavy-duty. With a life cycle of up to 1500000 cycles, this switch is durable, rugged and reliable.