Tehnilised dokumendid
Spetsifikatsioonid:
Extension Distance
41.6cm
Rail Width
15mm
For Use With
Compressors, Industrial Drives
Rail Length
990mm
Material
Steel
Brand
Bosch RexrothManufacturer Series
R0445
Päritoluriik
Germany
Toote üksikasjad
Evaluation Board for VNI4140K Solid-State Relay
The board demonstrates the features of the VNI4140K quad high side smart power solid-state relay. The reference design is suitable for use in programmable logic controllers (PLCs) as well as to drive generic loads which require up to 0.7A of nominal current (the typical current limitation is 0.7 to 1.7A). Thanks to the very low RDS(on) (only 80mΩ typ @ 25°C per channel) the device allows very low power consumption during operation and for this reason makes it an ideal solution for IP65/IP67 requirements. The device is compliant with IEC 61131-2 (Programmable Controllers International Standard).
Motor Controllers & Drivers, STMicroelectronics
Lao andmed ajutiselt ei ole saadaval.
Palun kontrollige hiljem uuesti.
€ 476,00
tk (ilma käibemaksuta)
€ 580,72
tk (koos käibemaksuga)
1
€ 476,00
tk (ilma käibemaksuta)
€ 580,72
tk (koos käibemaksuga)
1
Osta lahtiselt
kogus | Ühikuhind |
---|---|
1 - 4 | € 476,00 |
5 - 9 | € 457,00 |
10+ | € 422,00 |
Tehnilised dokumendid
Spetsifikatsioonid:
Extension Distance
41.6cm
Rail Width
15mm
For Use With
Compressors, Industrial Drives
Rail Length
990mm
Material
Steel
Brand
Bosch RexrothManufacturer Series
R0445
Päritoluriik
Germany
Toote üksikasjad
Evaluation Board for VNI4140K Solid-State Relay
The board demonstrates the features of the VNI4140K quad high side smart power solid-state relay. The reference design is suitable for use in programmable logic controllers (PLCs) as well as to drive generic loads which require up to 0.7A of nominal current (the typical current limitation is 0.7 to 1.7A). Thanks to the very low RDS(on) (only 80mΩ typ @ 25°C per channel) the device allows very low power consumption during operation and for this reason makes it an ideal solution for IP65/IP67 requirements. The device is compliant with IEC 61131-2 (Programmable Controllers International Standard).