Honeywell BZV6 Series Plunger Limit Switch, NO/NC, IP66, SPDT, Die Cast Zinc Housing, 600V ac Max, 15A Max
Tehnilised dokumendid
Spetsifikatsioonid:
Brand
HoneywellActuator Type
Plunger
Pole and Throw Configuration
SPDT
Normal State Configuration
NO/NC
IP Rating
IP66
Maximum Current
15A
Housing Material
Die Cast Zinc
Maximum AC Voltage
600V
Maximum DC Voltage
250V
Connection Type
1/2 in NPT
Series
BZV6
Action Type
Snap Action
Length
69.34mm
Minimum Operating Temperature
-32°C
Depth
54.48mm
Width
44.45mm
Maximum Operating Temperature
+71°C
Mounting Orientation
Vertical
Päritoluriik
United States
Toote üksikasjad
BZV6 Medium Duty Limit Switches
The BZV6 limit switch series from Honeywell is designed for use within a medium duty environment. The switches are offered with or without actuator seal boots. Both have a combination insulator/seal cemented inside the bottom enclosure. Lead washers are used to seal the mounting holes on side mount switches. Removal of the bottom enclosure exposes the terminals for easy wiring.
Lao andmed ajutiselt ei ole saadaval.
Palun kontrollige hiljem uuesti.
€ 86,50
tk (ilma käibemaksuta)
€ 105,53
tk (koos käibemaksuga)
1
€ 86,50
tk (ilma käibemaksuta)
€ 105,53
tk (koos käibemaksuga)
1
Osta lahtiselt
| kogus | Ühikuhind |
|---|---|
| 1 - 4 | € 86,50 |
| 5 - 9 | € 82,50 |
| 10+ | € 77,50 |
Tehnilised dokumendid
Spetsifikatsioonid:
Brand
HoneywellActuator Type
Plunger
Pole and Throw Configuration
SPDT
Normal State Configuration
NO/NC
IP Rating
IP66
Maximum Current
15A
Housing Material
Die Cast Zinc
Maximum AC Voltage
600V
Maximum DC Voltage
250V
Connection Type
1/2 in NPT
Series
BZV6
Action Type
Snap Action
Length
69.34mm
Minimum Operating Temperature
-32°C
Depth
54.48mm
Width
44.45mm
Maximum Operating Temperature
+71°C
Mounting Orientation
Vertical
Päritoluriik
United States
Toote üksikasjad
BZV6 Medium Duty Limit Switches
The BZV6 limit switch series from Honeywell is designed for use within a medium duty environment. The switches are offered with or without actuator seal boots. Both have a combination insulator/seal cemented inside the bottom enclosure. Lead washers are used to seal the mounting holes on side mount switches. Removal of the bottom enclosure exposes the terminals for easy wiring.