Tehnilised dokumendid
Spetsifikatsioonid:
Brand
LegrisConnector A
Push In 10 mm
Pneumatic Fitting Type
Tee Threaded Adaptor
Connection Style
Threaded-to-Tube
Threaded Connection
R 1/4 Male
Manufacturer Series
LF3000
Thread Material
Nickel Plated Brass
Maximum Operating Temperature
+80°C
Maximum Operating Pressure
20 bar
Body Material
Glass Reinforced Nylon
Minimum Operating Temperature
-20°C
Tube Connection B - Type
Push In
Connector B
Push In 10 mm
Päritoluriik
France
Toote üksikasjad
Stud Branch Tee Adaptor - Male Taper & Parallel Thread
A high-quality polymer push in fitting suitable for compressed air applications. The LF3000 fittings can be used in systems with a working pressure from a vacuum of 0.9 bar to a positive pressure of 20 bar. These fittings are suitable for use with all plastic pneumatic plastic tubing and are 100% leak tested during manufacture.
For the connection of 2 tubes at a 90° angle to a threaded port.
Threaded Tube Adaptors, Elbows and Tees
Lao andmed ajutiselt ei ole saadaval.
Palun kontrollige hiljem uuesti.
€ 14,10
tk (pakis 2) (ilma käibemaksuta)
€ 17,202
tk (pakis 2) (koos käibemaksuga)
2
€ 14,10
tk (pakis 2) (ilma käibemaksuta)
€ 17,202
tk (pakis 2) (koos käibemaksuga)
2
Osta lahtiselt
kogus | Ühikuhind | Per Pakend |
---|---|---|
2 - 8 | € 14,10 | € 28,20 |
10 - 18 | € 13,70 | € 27,40 |
20+ | € 12,80 | € 25,60 |
Tehnilised dokumendid
Spetsifikatsioonid:
Brand
LegrisConnector A
Push In 10 mm
Pneumatic Fitting Type
Tee Threaded Adaptor
Connection Style
Threaded-to-Tube
Threaded Connection
R 1/4 Male
Manufacturer Series
LF3000
Thread Material
Nickel Plated Brass
Maximum Operating Temperature
+80°C
Maximum Operating Pressure
20 bar
Body Material
Glass Reinforced Nylon
Minimum Operating Temperature
-20°C
Tube Connection B - Type
Push In
Connector B
Push In 10 mm
Päritoluriik
France
Toote üksikasjad
Stud Branch Tee Adaptor - Male Taper & Parallel Thread
A high-quality polymer push in fitting suitable for compressed air applications. The LF3000 fittings can be used in systems with a working pressure from a vacuum of 0.9 bar to a positive pressure of 20 bar. These fittings are suitable for use with all plastic pneumatic plastic tubing and are 100% leak tested during manufacture.
For the connection of 2 tubes at a 90° angle to a threaded port.