SMC Cylinder Repair Kit CS1N300A-PS, For Use With 300 mm Bore Size Air Cylinder

RS tootekood: 849-7323Bränd: SMCTootja Part nr.: CS1N300A-PSIMPA: 0
brand-logo
View all in Pneumatic Cylinder & Actuator Accessories

Tehnilised dokumendid

Spetsifikatsioonid:

For Use With

300 mm Bore Size Air Cylinder

Manufacturer Series

CS1N

Brand

SMC

Päritoluriik

Japan

Toote üksikasjad

Hubner+Suhner Adaptors for QMA interfaces

Hubner+Suhner adaptors are used within measuring applications with QMA interfaces. These versatile adaptors support the calibration with Hubne+Suhner open standard interfaces, incorporating the same electrical length and the same return loss behaviour of all this series of adaptors the swapping method can be utilised.

HUBER+SUHNER QMA

The interface is based on the SMA dimensions, but instead of a threaded coupling mechanism, a new snap-lock mechanism is used.The QMA interface has a very similar performance to the SMA, but in addition it offers an easier, faster and safer coupling operation, resulting in significant time saving during the production of systems. The packaging density of QMA is increased compared to SMA connectors as no torque spanner is required to fasten the coupling nut.

Lao andmed ajutiselt ei ole saadaval.

Palun kontrollige hiljem uuesti.

Lao andmed ajutiselt ei ole saadaval.

P.O.A.

SMC Cylinder Repair Kit CS1N300A-PS, For Use With 300 mm Bore Size Air Cylinder

1

Saadaval mitmekordselt 1
1P.O.A.
2P.O.A.
3P.O.A.
4P.O.A.
5P.O.A.
6P.O.A.
7P.O.A.
8P.O.A.
9P.O.A.
10P.O.A.
11P.O.A.
12P.O.A.
13P.O.A.
14P.O.A.
15P.O.A.

P.O.A.

SMC Cylinder Repair Kit CS1N300A-PS, For Use With 300 mm Bore Size Air Cylinder
Lao andmed ajutiselt ei ole saadaval.

1

Saadaval mitmekordselt 1
1P.O.A.
2P.O.A.
3P.O.A.
4P.O.A.
5P.O.A.
6P.O.A.
7P.O.A.
8P.O.A.
9P.O.A.
10P.O.A.
11P.O.A.
12P.O.A.
13P.O.A.
14P.O.A.
15P.O.A.

Tehnilised dokumendid

Spetsifikatsioonid:

For Use With

300 mm Bore Size Air Cylinder

Manufacturer Series

CS1N

Brand

SMC

Päritoluriik

Japan

Toote üksikasjad

Hubner+Suhner Adaptors for QMA interfaces

Hubner+Suhner adaptors are used within measuring applications with QMA interfaces. These versatile adaptors support the calibration with Hubne+Suhner open standard interfaces, incorporating the same electrical length and the same return loss behaviour of all this series of adaptors the swapping method can be utilised.

HUBER+SUHNER QMA

The interface is based on the SMA dimensions, but instead of a threaded coupling mechanism, a new snap-lock mechanism is used.The QMA interface has a very similar performance to the SMA, but in addition it offers an easier, faster and safer coupling operation, resulting in significant time saving during the production of systems. The packaging density of QMA is increased compared to SMA connectors as no torque spanner is required to fasten the coupling nut.