TE Connectivity Transparent Polyolefin Solder Sleeve 32.5mm Length 2.8 → 7.3mm Cable Diameter
Tehnilised dokumendid
Spetsifikatsioonid:
Brand
TE ConnectivityMinimum Cable Diameter
2.8mm
Maximum Cable Diameter
7.3mm
Sleeve Length
32.5mm
Material
Polyolefin
Minimum Operating Temperature
-55°C
Maximum Operating Temperature
+125°C
Quantity
1
Colour
Transparent
Standards Met
ANSI J-STD-004, ANSI J-STD-006
Series
B-155
Shrink Temperature
+85°C
Päritoluriik
Mexico
Toote üksikasjad
Solder Sleeves®
A one piece soldering system for jointing signal cables and terminating cable screens. The system consists of heat shrinkable sleeve containing a predetermined amount of fluxed solder and a thermoplastic sealing insert at each end. The solder sleeve is placed over the joint to be made and the sleeve is heated by a heat gun. The sleeve shrinks, the sealing inserts melt and flow and the solder starts to melt. Heating is continued until the solder is seen to fully melt and flow. Temperature range -55°C to +125°C.
Lao andmed ajutiselt ei ole saadaval.
Palun kontrollige hiljem uuesti.
€ 1,75
tk (pakis 100) (ilma käibemaksuta)
€ 2,135
tk (pakis 100) (koos käibemaksuga)
100
€ 1,75
tk (pakis 100) (ilma käibemaksuta)
€ 2,135
tk (pakis 100) (koos käibemaksuga)
100
Osta lahtiselt
| kogus | Ühikuhind | Per Pakend |
|---|---|---|
| 100 - 1400 | € 1,75 | € 175,00 |
| 1500 - 4900 | € 1,65 | € 165,00 |
| 5000+ | € 1,60 | € 160,00 |
Tehnilised dokumendid
Spetsifikatsioonid:
Brand
TE ConnectivityMinimum Cable Diameter
2.8mm
Maximum Cable Diameter
7.3mm
Sleeve Length
32.5mm
Material
Polyolefin
Minimum Operating Temperature
-55°C
Maximum Operating Temperature
+125°C
Quantity
1
Colour
Transparent
Standards Met
ANSI J-STD-004, ANSI J-STD-006
Series
B-155
Shrink Temperature
+85°C
Päritoluriik
Mexico
Toote üksikasjad
Solder Sleeves®
A one piece soldering system for jointing signal cables and terminating cable screens. The system consists of heat shrinkable sleeve containing a predetermined amount of fluxed solder and a thermoplastic sealing insert at each end. The solder sleeve is placed over the joint to be made and the sleeve is heated by a heat gun. The sleeve shrinks, the sealing inserts melt and flow and the solder starts to melt. Heating is continued until the solder is seen to fully melt and flow. Temperature range -55°C to +125°C.