Tehnilised dokumendid
Spetsifikatsioonid:
Brand
TE ConnectivitySleeve Diameter
9.5mm
Colour
Red
Shrunk Diameter
3.4mm
Sleeve Type
Heat Shrink
Adhesive Lined
No
Shrink Ratio
3:1
Sleeve Length
300mm
Material
Cross Linked Polyolefin
Operating Temperature Range
-55 → +110 °C
Flame Retardant
No
Halogen Free
Yes
Standards Met
ELV, Military AMS-DTL 23053/4, RoHS Compliant, UL E85381
Series
SCL
Päritoluriik
Czech Republic
Toote üksikasjad
Raychem SCL™
SCL tubing is a semi-rigid heat shrinkable tubing with a meltable inner wall, designed to provide one-step moisture proof encapsulation of a wide variety of electrical parts including wire splices, breakouts, and electronic components. Manufactured from radiation cross linked polyolefins, the outer wall shrinks when heated to above 135°C, while the inner wall (which melts at 100°C) flows into the crevices and interstices by the shrinking action of the outer tubing. When cooled the entire mass becomes a rigid, tough, homogenous covering with a controlled wall thickness. SCL® shrinks to between 17% and 40% of its supplied diameter according to size, and therefore few sizes are required to cover a range of irregular shapes with widely varying dimensions. Unaffected by most solvents and chemicals and non-corrosive in contact with electrical joints, SCL also has high dielectric strength (240-410 kV/cm dependent on wall thickness). Colour: Black.,Sizes quoted are as supplied.
Standards
AMS-DTL 23053/ 4 class 1.
Lao andmed ajutiselt ei ole saadaval.
Palun kontrollige hiljem uuesti.
€ 2,60
tk (pakis 5) (ilma käibemaksuta)
€ 3,172
tk (pakis 5) (koos käibemaksuga)
5
€ 2,60
tk (pakis 5) (ilma käibemaksuta)
€ 3,172
tk (pakis 5) (koos käibemaksuga)
5
Tehnilised dokumendid
Spetsifikatsioonid:
Brand
TE ConnectivitySleeve Diameter
9.5mm
Colour
Red
Shrunk Diameter
3.4mm
Sleeve Type
Heat Shrink
Adhesive Lined
No
Shrink Ratio
3:1
Sleeve Length
300mm
Material
Cross Linked Polyolefin
Operating Temperature Range
-55 → +110 °C
Flame Retardant
No
Halogen Free
Yes
Standards Met
ELV, Military AMS-DTL 23053/4, RoHS Compliant, UL E85381
Series
SCL
Päritoluriik
Czech Republic
Toote üksikasjad
Raychem SCL™
SCL tubing is a semi-rigid heat shrinkable tubing with a meltable inner wall, designed to provide one-step moisture proof encapsulation of a wide variety of electrical parts including wire splices, breakouts, and electronic components. Manufactured from radiation cross linked polyolefins, the outer wall shrinks when heated to above 135°C, while the inner wall (which melts at 100°C) flows into the crevices and interstices by the shrinking action of the outer tubing. When cooled the entire mass becomes a rigid, tough, homogenous covering with a controlled wall thickness. SCL® shrinks to between 17% and 40% of its supplied diameter according to size, and therefore few sizes are required to cover a range of irregular shapes with widely varying dimensions. Unaffected by most solvents and chemicals and non-corrosive in contact with electrical joints, SCL also has high dielectric strength (240-410 kV/cm dependent on wall thickness). Colour: Black.,Sizes quoted are as supplied.
Standards
AMS-DTL 23053/ 4 class 1.