Tehnilised dokumendid
Spetsifikatsioonid:
Brand
MurataOutput Voltage
1.8V dc
Input Voltage Range
4.5 → 5.5 V dc
Power Rating
11W
Input Voltage Nominal
5 V dc
Output Current
6A
Mounting Type
Surface Mount
Number of Outputs
1
Length
9mm
Width
7.5mm
Depth
5mm
Series
MGK
Load Regulation
±1%
Standards Met
CSA-C22.2 No. 60950-1, EN 60950, IEC, IEC/EN 60950-1, UL, UL 60950-1
Minimum Temperature
-40°C
Efficiency
90%
Maximum Temperature
+85°C
Toote üksikasjad
Murata Mono Block 6A DC-DC Converter
The MYMGK***06 series are miniature Mono Block type non-isolated Point-of-Load (PoL) DC-DC power converters for embedded applications. The tiny form factor measures only 9.0 x 7.5 x 5.0 mm. Applications include powering FPGA/CPUs, Datacom/telecom systems, Distributed Bus Architectures (DBA), programmable logic and mixed voltage systems. The converters have input voltage ranges of 4.5 to 5.5 V dc(*FRSR) or 8.0 to 14 V dc(*ERSR) and a maximum output current of 6 Amps. Based on a fixed frequency synchronous buck converter switching topology, this high power conversion efficient PoL module features programmable output voltage 0.7to1.8 V dc(*FRSR) or 0.7 to 5.0 V dc(*ERSR), On/Off control and Power Good signal output. These converters also include under voltage lock out (UVLO), output short circuit protection and over-current protection.
Lao andmed ajutiselt ei ole saadaval.
Palun kontrollige hiljem uuesti.
€ 5,30
tk (ilma käibemaksuta)
€ 6,47
tk (koos käibemaksuga)
1
€ 5,30
tk (ilma käibemaksuta)
€ 6,47
tk (koos käibemaksuga)
1
Tehnilised dokumendid
Spetsifikatsioonid:
Brand
MurataOutput Voltage
1.8V dc
Input Voltage Range
4.5 → 5.5 V dc
Power Rating
11W
Input Voltage Nominal
5 V dc
Output Current
6A
Mounting Type
Surface Mount
Number of Outputs
1
Length
9mm
Width
7.5mm
Depth
5mm
Series
MGK
Load Regulation
±1%
Standards Met
CSA-C22.2 No. 60950-1, EN 60950, IEC, IEC/EN 60950-1, UL, UL 60950-1
Minimum Temperature
-40°C
Efficiency
90%
Maximum Temperature
+85°C
Toote üksikasjad
Murata Mono Block 6A DC-DC Converter
The MYMGK***06 series are miniature Mono Block type non-isolated Point-of-Load (PoL) DC-DC power converters for embedded applications. The tiny form factor measures only 9.0 x 7.5 x 5.0 mm. Applications include powering FPGA/CPUs, Datacom/telecom systems, Distributed Bus Architectures (DBA), programmable logic and mixed voltage systems. The converters have input voltage ranges of 4.5 to 5.5 V dc(*FRSR) or 8.0 to 14 V dc(*ERSR) and a maximum output current of 6 Amps. Based on a fixed frequency synchronous buck converter switching topology, this high power conversion efficient PoL module features programmable output voltage 0.7to1.8 V dc(*FRSR) or 0.7 to 5.0 V dc(*ERSR), On/Off control and Power Good signal output. These converters also include under voltage lock out (UVLO), output short circuit protection and over-current protection.