Tehnilised Dokumendid
Spetsifikatsioonid:
Brand
Renesas ElectronicsProduct Type
RF Switch
Switching Speed
500ns
Port to Port Isolation
39dB
Contact Configuration
SPST
Maximum Insertion Loss
1dB
Output Impedance
50Ω
Minimum Operating Temperature
-55°C
Contact DC Voltage
0.3V dc
Height
900μm
Maximum Operating Temperature
105°C
Length
2mm
Standards/Approvals
No
Series
F2910
Maximum Frequency
8000MHz
Width
2mm
Minimum Frequency
30MHz
Päritoluriik
Taiwan, Province Of China
Toote üksikasjad
The Renesas Electronics RF switch is a high reliability with low insertion loss and 50Ω absorptive SPST switch designed for a multitude of wireless and RF applications. This device covers a broad frequency range from 30MHz to 8000MHz. In addition to providing low insertion loss and it also deliver excellent linearity and isolation performance while providing a 50Ω termination on RF2 in the isolation mode. It uses a single positive supply voltage supporting either 3.3V or 1.8V control logic.
Lao andmed ajutiselt ei ole saadaval.
€ 4 050,00
€ 1,35 tk (rullis 3000) (ilma käibemaksuta)
€ 5 022,00
€ 1,674 tk (rullis 3000) (koos käibemaksuga)
3000
€ 4 050,00
€ 1,35 tk (rullis 3000) (ilma käibemaksuta)
€ 5 022,00
€ 1,674 tk (rullis 3000) (koos käibemaksuga)
Lao andmed ajutiselt ei ole saadaval.
3000
Tehnilised Dokumendid
Spetsifikatsioonid:
Brand
Renesas ElectronicsProduct Type
RF Switch
Switching Speed
500ns
Port to Port Isolation
39dB
Contact Configuration
SPST
Maximum Insertion Loss
1dB
Output Impedance
50Ω
Minimum Operating Temperature
-55°C
Contact DC Voltage
0.3V dc
Height
900μm
Maximum Operating Temperature
105°C
Length
2mm
Standards/Approvals
No
Series
F2910
Maximum Frequency
8000MHz
Width
2mm
Minimum Frequency
30MHz
Päritoluriik
Taiwan, Province Of China
Toote üksikasjad
The Renesas Electronics RF switch is a high reliability with low insertion loss and 50Ω absorptive SPST switch designed for a multitude of wireless and RF applications. This device covers a broad frequency range from 30MHz to 8000MHz. In addition to providing low insertion loss and it also deliver excellent linearity and isolation performance while providing a 50Ω termination on RF2 in the isolation mode. It uses a single positive supply voltage supporting either 3.3V or 1.8V control logic.