Tehnilised Dokumendid
Spetsifikatsioonid:
Brand
RS ProProduct Type
Toggle Switch
Contact Configuration
DPDT
Switch Operation
On-Off-On
Switch Contact Current
400mA
Mount Type
PCB
Terminal Type
Solder
IP Rating
IP66, IP56
Illuminated
No
Actuator Length
5.33mm
Minimum Operating Temperature
-30°C
Contact DC Voltage
15V dc
Contact AC Voltage
240V ac
Actuator Material
Chrome Plated Brass
Maximum Operating Temperature
85°C
Switch Configuration
On-Off-On
Standards/Approvals
UL, CE, CSA, RoHS
Toote üksikasjad
The RS PRO DPDT (double pole double throw) toggle switch lets you control two separate circuits from the same actuator (switch). Found in industrial and commercial settings, it's often used in factories and workshops. It's a useful component for those situations when panel space or board size is at a premium.
This switch has a double pole double throw functionality, which means two different circuits can be served by the same pole. It's handy in circuits that need changing voltages to be applied to connected devices. There's a contact current rating of 400 mA @ 20 V DC and a contact resistance of 20 mΩ.
As part of our trusted RS PRO range, the switch been tested for durability and consistency. It comes with epoxy sealed terminals, so dust and dirt don't get inside the component. There's also a corrosion-resistant chrome-plated brass actuator and a hardwearing diallyl phthalate case.
RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards; theyre only given the RS PRO Seal of Approval if were confident of their exceptional quality, which means you can be confident too.
Lao andmed ajutiselt ei ole saadaval.
€ 5,50
€ 5,50 tk (ilma käibemaksuta)
€ 6,82
€ 6,82 tk (koos käibemaksuga)
1
€ 5,50
€ 5,50 tk (ilma käibemaksuta)
€ 6,82
€ 6,82 tk (koos käibemaksuga)
Lao andmed ajutiselt ei ole saadaval.
1
| kogus | Ühikuhind |
|---|---|
| 1 - 49 | € 5,50 |
| 50 - 99 | € 4,40 |
| 100 - 249 | € 3,45 |
| 250 - 499 | € 3,30 |
| 500+ | € 3,20 |
Tehnilised Dokumendid
Spetsifikatsioonid:
Brand
RS ProProduct Type
Toggle Switch
Contact Configuration
DPDT
Switch Operation
On-Off-On
Switch Contact Current
400mA
Mount Type
PCB
Terminal Type
Solder
IP Rating
IP66, IP56
Illuminated
No
Actuator Length
5.33mm
Minimum Operating Temperature
-30°C
Contact DC Voltage
15V dc
Contact AC Voltage
240V ac
Actuator Material
Chrome Plated Brass
Maximum Operating Temperature
85°C
Switch Configuration
On-Off-On
Standards/Approvals
UL, CE, CSA, RoHS
Toote üksikasjad
The RS PRO DPDT (double pole double throw) toggle switch lets you control two separate circuits from the same actuator (switch). Found in industrial and commercial settings, it's often used in factories and workshops. It's a useful component for those situations when panel space or board size is at a premium.
This switch has a double pole double throw functionality, which means two different circuits can be served by the same pole. It's handy in circuits that need changing voltages to be applied to connected devices. There's a contact current rating of 400 mA @ 20 V DC and a contact resistance of 20 mΩ.
As part of our trusted RS PRO range, the switch been tested for durability and consistency. It comes with epoxy sealed terminals, so dust and dirt don't get inside the component. There's also a corrosion-resistant chrome-plated brass actuator and a hardwearing diallyl phthalate case.
RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards; theyre only given the RS PRO Seal of Approval if were confident of their exceptional quality, which means you can be confident too.
