STMicroelectronics MCP9701T Series, Digital Output Temperature & Humidity Sensor, Surface Mount, SMBus, ±2.5 %, 6-Pin

Name: STMicroelectronics MCP9701T Series, Digital Output Temperature & Humidity Sensor, Surface Mount, SMBus, ±2.5 %, 6-Pin
Brand: STMicroelectronics
SKU: 1908454
Availability: LimitedAvailability

RS tootekood: 190-8454Bränd: STMicroelectronicsTootja Part nr.: STTS751-1DP3F

Kuva kõik kategoorias Temperature & Humidity Sensor ICs

Tehnilised Dokumendid

Spetsifikatsioonid:

Brand

STMicroelectronics

Product Type

Temperature & Humidity Sensor

Output Type

Digital

Sub Type

Temperature Sensor

Interface Type

SMBus

Accuracy

±2.5 %

Mount Type

Surface

Pin Count

Maximum Operating Temperature

125°C

Minimum Operating Temperature

-40°C

Minimum Supply Voltage

2.25V

Maximum Supply Voltage

3.6V

Package Type

UDFN

Length

2.05mm

Height

0.5mm

Standards/Approvals

Series

MCP9701T

Automotive Standard

Toote üksikasjad

The STTS751 is a digital temperature sensor which communicates over a 2-wire SMBus 2.0 compatible bus. The temperature is measured with a user-configurable resolution between 9 and 12 bits. At 9 bits, the smallest step size is 0.5 °C, and at 12 bits, it is 0.0625 °C. At the default resolution (10 bits, 0.25 °C/LSB), the conversion time is nominally 21 milliseconds.
The open-drain EVENT output is used to indicate an alarm condition in which the measured temperature has exceeded the user-programmed high limit or fallen below the low limit. When the EVENT pin is asserted, the host can respond using the SMBus Alert Response Address (ARA) protocol to which the STTS751 will respond by sending its slave address.
The STTS751 is a 6-pin device that supports user-configurable slave addresses. Via the pull-up resistor on the Addr/Therm pin, one of four different slave addresses can be specified. Two order numbers (STTS751-0 and STTS751-1) provide two different sets of slave addresses bringing the total available to eight. Thus, up to eight devices can share the same 2-wire SMBus without ambiguity, thereby allowing monitoring of multiple temperature zones in an application.
The two-wire interface can support transfer rates up to 400 kHz.

Ideate. Create. Collaborate

JOIN FOR FREE

No hidden fees!

Download and use our DesignSpark software for your PCB and 3D Mechanical designs
View and contribute website content and forums
Download 3D Models, Schematics and Footprints from more than a million products

Click here to find out more

Kuva kõik kategoorias Temperature & Humidity Sensor ICs

Lao andmed ajutiselt ei ole saadaval.

€ 2 262,00

€ 0,754 tk (rullis 3000) (ilma käibemaksuta)

€ 2 804,88

€ 0,935 tk (rullis 3000) (koos käibemaksuga)

STMicroelectronics MCP9701T Series, Digital Output Temperature & Humidity Sensor, Surface Mount, SMBus, ±2.5 %, 6-Pin

€ 2 262,00

€ 0,754 tk (rullis 3000) (ilma käibemaksuta)

€ 2 804,88

€ 0,935 tk (rullis 3000) (koos käibemaksuga)

STMicroelectronics MCP9701T Series, Digital Output Temperature & Humidity Sensor, Surface Mount, SMBus, ±2.5 %, 6-Pin

Lao andmed ajutiselt ei ole saadaval.

Ideate. Create. Collaborate

JOIN FOR FREE

No hidden fees!

Download and use our DesignSpark software for your PCB and 3D Mechanical designs
View and contribute website content and forums
Download 3D Models, Schematics and Footprints from more than a million products

Click here to find out more

Tehnilised Dokumendid

Spetsifikatsioonid:

Brand

STMicroelectronics

Product Type

Temperature & Humidity Sensor

Output Type

Digital

Sub Type

Temperature Sensor

Interface Type

SMBus

Accuracy

±2.5 %

Mount Type

Surface

Pin Count

Maximum Operating Temperature

125°C

Minimum Operating Temperature

-40°C

Minimum Supply Voltage

2.25V

Maximum Supply Voltage

3.6V

Package Type

UDFN

Length

2.05mm

Height

0.5mm

Standards/Approvals

Series

MCP9701T

Automotive Standard

Toote üksikasjad

The STTS751 is a digital temperature sensor which communicates over a 2-wire SMBus 2.0 compatible bus. The temperature is measured with a user-configurable resolution between 9 and 12 bits. At 9 bits, the smallest step size is 0.5 °C, and at 12 bits, it is 0.0625 °C. At the default resolution (10 bits, 0.25 °C/LSB), the conversion time is nominally 21 milliseconds.
The open-drain EVENT output is used to indicate an alarm condition in which the measured temperature has exceeded the user-programmed high limit or fallen below the low limit. When the EVENT pin is asserted, the host can respond using the SMBus Alert Response Address (ARA) protocol to which the STTS751 will respond by sending its slave address.
The STTS751 is a 6-pin device that supports user-configurable slave addresses. Via the pull-up resistor on the Addr/Therm pin, one of four different slave addresses can be specified. Two order numbers (STTS751-0 and STTS751-1) provide two different sets of slave addresses bringing the total available to eight. Thus, up to eight devices can share the same 2-wire SMBus without ambiguity, thereby allowing monitoring of multiple temperature zones in an application.
The two-wire interface can support transfer rates up to 400 kHz.

Ideate. Create. Collaborate

JOIN FOR FREE

No hidden fees!

Download and use our DesignSpark software for your PCB and 3D Mechanical designs
View and contribute website content and forums
Download 3D Models, Schematics and Footprints from more than a million products

Click here to find out more