Tehnilised Dokumendid
Spetsifikatsioonid:
Brand
TE ConnectivityProduct Type
Solder Sleeve
Sub Type
Terminator
Sleeve Length
16mm
Material
Polyolefin
Dielectric Strength
1kV
Minimum Cable Diameter
900μm
Maximum Cable Diameter
2mm
Colour
Transparent
Minimum Operating Temperature
-55°C
Maximum Operating Temperature
125°C
Standards/Approvals
ANSI J-STD-004, ANSI J-STD-006
Shrink Temperature
85°C
Series
B-155
Päritoluriik
Mexico
Toote üksikasjad
Each terminator consists of heatshrinkable sleeve containing prefluxed solder preform. To install, simply position the terminator over the pre-stripped wire/pin and apply heat. The sleeve will shrink and the solder will melt and flow, resulting in a perfectly soldered, insulated and strain relieved termination. On connectors where there are several pins to be terminated it is possible to position and recover an entire row of solder sleeves in one go.,Recommended for use with most connector pins/posts/tabs applications such as LED's, switches, multiple row/pin connectors.
Lao andmed ajutiselt ei ole saadaval.
€ 271,00
€ 271,00 1 pakk 500 tk (ilma käibemaksuta)
€ 336,04
€ 336,04 1 pakk 500 tk (koos käibemaksuga)
1
€ 271,00
€ 271,00 1 pakk 500 tk (ilma käibemaksuta)
€ 336,04
€ 336,04 1 pakk 500 tk (koos käibemaksuga)
Lao andmed ajutiselt ei ole saadaval.
1
Tehnilised Dokumendid
Spetsifikatsioonid:
Brand
TE ConnectivityProduct Type
Solder Sleeve
Sub Type
Terminator
Sleeve Length
16mm
Material
Polyolefin
Dielectric Strength
1kV
Minimum Cable Diameter
900μm
Maximum Cable Diameter
2mm
Colour
Transparent
Minimum Operating Temperature
-55°C
Maximum Operating Temperature
125°C
Standards/Approvals
ANSI J-STD-004, ANSI J-STD-006
Shrink Temperature
85°C
Series
B-155
Päritoluriik
Mexico
Toote üksikasjad
Each terminator consists of heatshrinkable sleeve containing prefluxed solder preform. To install, simply position the terminator over the pre-stripped wire/pin and apply heat. The sleeve will shrink and the solder will melt and flow, resulting in a perfectly soldered, insulated and strain relieved termination. On connectors where there are several pins to be terminated it is possible to position and recover an entire row of solder sleeves in one go.,Recommended for use with most connector pins/posts/tabs applications such as LED's, switches, multiple row/pin connectors.
