TE Connectivity Transparent Polyolefin Solder Sleeve 26mm Length 0.4 → 1.7mm Cable Diameter

RS tootekood: 136-2079Bränd: TE ConnectivityTootja Part nr.: B-155-9001
brand-logo
View all in Jootmuhvid

Tehnilised dokumendid

Spetsifikatsioonid:

Minimum Cable Diameter

0.4mm

Maximum Cable Diameter

1.7mm

Sleeve Length

26mm

Material

Polyolefin

Minimum Operating Temperature

-55°C

Maximum Operating Temperature

+125°C

Quantity

1

Colour

Transparent

Shrink Temperature

+85°C

Series

B-155

Standards Met

ANSI J-STD-004, ANSI J-STD-006

Päritoluriik

Mexico

Toote üksikasjad

Solder Sleeves®

A one piece soldering system for jointing signal cables and terminating cable screens. The system consists of heat shrinkable sleeve containing a predetermined amount of fluxed solder and a thermoplastic sealing insert at each end. The solder sleeve is placed over the joint to be made and the sleeve is heated by a heat gun. The sleeve shrinks, the sealing inserts melt and flow and the solder starts to melt. Heating is continued until the solder is seen to fully melt and flow. Temperature range -55°C to +125°C.

Lao andmed ajutiselt ei ole saadaval.

Palun kontrollige hiljem uuesti.

Lao andmed ajutiselt ei ole saadaval.

€ 62,50

1 pakk 100 tk (ilma käibemaksuta)

€ 76,25

1 pakk 100 tk (koos käibemaksuga)

TE Connectivity Transparent Polyolefin Solder Sleeve 26mm Length 0.4 → 1.7mm Cable Diameter

€ 62,50

1 pakk 100 tk (ilma käibemaksuta)

€ 76,25

1 pakk 100 tk (koos käibemaksuga)

TE Connectivity Transparent Polyolefin Solder Sleeve 26mm Length 0.4 → 1.7mm Cable Diameter
Lao andmed ajutiselt ei ole saadaval.

Tehnilised dokumendid

Spetsifikatsioonid:

Minimum Cable Diameter

0.4mm

Maximum Cable Diameter

1.7mm

Sleeve Length

26mm

Material

Polyolefin

Minimum Operating Temperature

-55°C

Maximum Operating Temperature

+125°C

Quantity

1

Colour

Transparent

Shrink Temperature

+85°C

Series

B-155

Standards Met

ANSI J-STD-004, ANSI J-STD-006

Päritoluriik

Mexico

Toote üksikasjad

Solder Sleeves®

A one piece soldering system for jointing signal cables and terminating cable screens. The system consists of heat shrinkable sleeve containing a predetermined amount of fluxed solder and a thermoplastic sealing insert at each end. The solder sleeve is placed over the joint to be made and the sleeve is heated by a heat gun. The sleeve shrinks, the sealing inserts melt and flow and the solder starts to melt. Heating is continued until the solder is seen to fully melt and flow. Temperature range -55°C to +125°C.